laguna LT14 series, User Manual

Page: 14 / 55

14
If no lifting device is available, the machine can be removed from the pallet as follows:
Note: The machine is heavy, and if you have any doubt about the described procedure,
seek professional assistance. Do not attempt any procedure that you feel is unsafe or that
you do not have the physical capability of achieving. With two or more people, move the
machine so that the base of the bandsaw is over the edge of the pallet. Tilt the bandsaw
away from the pallet so that the base of the machine touches the floor. Slide the pallet from
under the machine and then move the bandsaw to the vertical position so that it is
completely resting on the floor.
Assembly & Setup
Mounting the Motor
Two people are required to assemble the motor to the bandsaw; build up wooden blocks to
the right height to rest the motor on. One person holds the motor in position, and the other
will fit the drive belt and the bolts.
1. Attach the motor mounting plate to the motor with the four bolts provided.