-3-
www.igmtools.com
Contents
1. Declaration of conformity
1.1 Warranty
2. CFlux3 Specifications
3. General Safety Rules and Instructions
3.1 Important Safety Instructions
3.2 General Rules
3.3 Additional Safety Intructions
3.5 Motor Specifications
3.6 Grounding Instructions
4. Parts Description
4.1 Functions
5. Assembly
6.1 Unpacking
6.2 Assembling the Unit
6. Maintenance
Parts List
7. Troubleshooting
1. Declaration of conformity
We declare that this product is in compliance with the directive and the
standard mentioned on the previous page of this manual.
1.1 Warranty
IGM Tools & Machinery strives to always deliver high-quality machinery.
The warranty is governed by the valid terms and conditions of IGM Tools &
Machinery available at www.igmtools.com.
2.
Specifications
Motor
2200 W (3Hp)
Power
400V / 50Hz / 3PH
Recommended Breaker
Size 16 A, tripping characteristic C (16/3/C)
Airflow (traditional method)
3831 m3/hour (2253 CFM)
Airflow (realistic method)
2209 m3/hour (1299 CFM)
Max. Static Pressure
285 mm in water
Fan Diameter
390 mm
Inlet Diameter
1x 200 mm or 3 x 100 mm
Switch
High frequency remote control switch
Noise
Level 82 dB(A) @ 3 m
Drum Collection
Capacity 209 l, octagonal drum
Packing Size (WxDxH)
1260 x 770 x 1250 mm
Weight
140 kg
Shipping Weight
170 kg
Filter
Filtering Area: 9,5 m2
Cartridge Filter diameter 400 mm x height 900 mm
Filtration Size
1 Micron, 99.7 %
Drum Collection Bag Layflat Size 960 x 960 mm
Filter Collection Bag Layflat Size 660 x 620 mm
3. General Safety Rules and Instructions
3.1 Important Safety Instructions
Read and understand all warnings and operating instructions before using
this equipment. Failure to follow all instructions listed below, may result in
electric shock, fire, and/or serious personal injury or property damage.
Woodworking can be dangerous if safe and proper operating procedures
are not followed. As with all machinery, there are certain hazards involved
with the operation of the product. Using the machine with respect and
caution will considerably lessen the possibility of personal injury. However,
if normal safety precautions are overlooked or ignored, personal injury
to the operator may result. Safety equipment such as guards, push
sticks, hold-downs, feather boards, goggles, dust masks and hearing
protection can reduce your potential for injury. But even the best guard
won’t make up for poor judgment, carelessness or inattention. Always use
common sense and exercise caution in the workshop. If a procedure feels
dangerous, don’t try it. Figure out an alternative procedure that feels safer.
REMEMBER: Your personal safety is your responsibility.
This machine was designed for certain applications only. We strongly
recommend that this machine not be modified and/or used for any
application other than that for which it was designed. If you have any
questions relative to a particular application, do not use the machine until
you have first contacted the manufacturer to determine if it can or should
be performed on the product.
If you have any questions relative to its application do not use the product
until you have contacted the manufacturer and we have advised you.
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)
To reduce the risk of fire, electric shock, or injury:
• Do not leave appliance when plugged in. Unplug from outlet when not in
use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
• Use only as described in this manual. Use only manufacturer’s
recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water,
return it to a service centre.
• Do not pull or carry by cord, use cord as a handle, close a door on cord,
or pull cord around sharp edges or corners. Do not run appliance over
cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening
blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
EN - English
Operating Instructions
(translation of the original instructions)
Dear Woodworker,
Thank you for your purchase and welcome to the Laguna Tools group of discerning woodworkers. We understand that you have a
choice of where to purchase your machines and appreciate the confidence you have in the Laguna Tools brand.
Every machine manufactured by Laguna Tools has been carefully designed and well thought through from a woodworker’s perspective.
Through hands-on experience, Laguna Tools is constantly working hard to make innovative, precision products. Products that inspire
you to create works of art, are a joy to run and work on, and encourage your performance.