1HP One stage Dust Collector Manual
24
COLLECTION BAGS TO CHUTE
DISCONNECT THE MACHINE FROM THE POWER SOURCE!
USING THE CLOTH SNAP BAND RING:
1.
Place the cloth-covered snap band ring (A) Fig. 5 inside the opening
of the clear plastic collection bag. Fold about 6 inches of the bag
around the snap band ring.
2.
Place the bag in the large opening (B) Fig. 6 in the dust chute. Fit
the snap band ring into the bottom channel (B) Fig.6. Bend and fold
the snap band ring to fit it into place.
3.
Tug slight on the bag to eliminate any slack and make sure that the
bag is secure and will not detach during collection.
USING A METAL BAG CLAMP:
You can also attach the plastic bag to the outside of the dust collector using
the included metal bag clamp (B) Fig. 7.
1.
Place the metal bag clamp (B) around the top of the plastic bag (A).
Fold about 4 to 6 inches of plastic bag over the clamp (Fig. 7).
2.
Place the metal bag clamp and plastic bag (A) Fig. 8 on the dust
chute. Fasten the metal bag clamp (B) securely.
