1HP One stage Dust Collector Manual
14
GENERAL TOOL ASSEMBLY
Tools Required
12mm wrench by 14mm wrench (supplied in hardware pack)
Phillips screwdriver (not supplied)
SEVERE LACERATION HAZARD. TURN THE UNIT “OFF”,
DISCONNECT THE UNIT from the power source and wait 2-
1/2 minutes to allow time for internal rotating components to stop before
installing or removing accessories, before adjusting or changing set-ups,
clearing clogs or when making repairs. For your own safety, do not connect
the machine to the power source until the machine is completely assembled.
Please also make sure that you read and understand the entire instruction
manual.
ASSEMBLY TIME ESTIMATE
1 hour to 2 hours
CASTERS
1.
Locate the bag of hardware with the four 3/8” flat washers for the
four 2” casters.
2.
Place a 3/8 flat washer onto each bolt of the caster.
