Laguna Tools Platinum 18/47 Series, Manual

Page: 18 / 28

18
Motor clamp handle
Electrical controls
Power on-off switch.
The on / off switch activates or de activates the
Electrical system including the motor.
Electrical reset button.
Should the electrical system become overloaded
the internal breaker will trip. To reset, correct the
reason for the overload and then reset the system
by pressing the reset button.
Spindle direction switch.
The spindle direction switch has three positions.
Forward, stop, reverse.
When changing spindle direction, it is very
important that the switch is left in the stop [0]
position until the spindle has come to a complete
stop.
If the switch is moved from forward to reverse
while the spindle is rotating the electrical
system will be strained and failure will occur.
Speed control knob.
The speed control knob is used to control the speed of the spindle.
Note. Max torque is a setting of 50% or greater, lower than 25% will stress the
electrical components and eventually cause failure.
Electrical reset button
Spindle direction switch
Power on / off switch
Speed control