REV. 1
14
Lower the upper wheel using the blade tension handle on the top of the bandsaw
and remove the cardboard packing.
Extension table fitted. Attach table with bolts but do not over tighten. Using a
straight edge (as shown) move the extension so that it is leveled with the table.
There are two small allen screws (allen wrench not provided) that can be adjusted
to bring the table parallel to the main table. When parallel and leveled with the
main table, tighten bolts. The action of tightening the bolts may move the table
position so refinement in adjustment may be necessary.
Summary of Contents for LT14 SEL
