REV. 1
3
LT14 SEL Bandsaw
MBAND145400
Blade length 103” to 105”.
Resaw capacity 8 5/8”.
Heavy duty dynamically balanced cast iron wheels.
Wheel dia 14” x 1 ¼”.
Wheel bearings sealed.
Miter gage slot 3/8” x ¾”.
Upper wheel tension and tilt system in solid steel and cast iron.
Solid upper guide post adjustable to be parallel to blade.
Recommended blades ¼” to ¾”.
Cast table size 15” x 15” with 4” steel extension (Total table size 19” x
15”).
Distance from column to blade 13 ¼”.
Table tilt from -15
to +45
degrees with flip positive stop at 90
degrees.
Double cast iron trunion.
Blade change from the side of the table.
Throat plate aluminum with 3 leveling screws.
Height from ground to table 44” with stand.
Height from base to table 24” without stand.
Base size 13 ½” x 24”.
Space age ceramic blade guide system both top and bottom.
Dust port at the side under the lower blade guide 3 1/8” dia.
Easy adjustable (for blade drift) rip Fence 16” long x 3” high and 1 5/8”.
1” solid steel fence rail.
Motor 1.5 HP 220V 1 Phase only.
Breaker size 15 amp.
Wire supplied 6’ long [No plug supplied].
If a longer wire is required use 12 swg.
Machine weight 230 lbs.
Options
Miter gauge
MBB35.00.08.00
5lbs
Stand
MBB35.00.09.00
25lbs
Summary of Contents for LT14 SEL
