Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
961005
12
REV042023
OPERATION
1. Turn machine on.
2. Position work piece on center of work rest. Always use 2 hands and the work rest to
support your work.
3. Using both hands slowly feed it into contact wheel with light consistent pressure. DO
NOT force the work against the belt/wheel.
a. There is workpiece clearance on both sides of the contact wheel to grind the sides
of your work piece.
CHOOSING A BELT
Machine uses 3” x 79” belt.
Belt Material
Operation
Aluminum Oxide
Finishing, Ferrous metals
Zirconia Alumina Finishing, wet or dry grinding, Ferrous metals, some steels
Ceramic
Aggressing grinding, deburring. Heat sensitive metals
Silicon Carbide
Cutting, stock removal, wet or dry grinding. Cast iron, steel, non-ferrous
metals.
MAINTENANCE
Before each use:
•
Loose mounting bolts
•
Worn or damaged belt
•
Worn or damaged wires
•
Any safety concern or damaged part
Weekly Maintenance:
•
Remove dust and shavings from outside of machine.
•
Remove dust or shavings from inside belt compartment, spark tray and from motor.
Monthly Maintenance:
•
Lubricate belt tension pin. See TROUBLESHOOTING” section of this manual.
LUBRICATION
•
Bearings are permanently sealed and lubricated.
•
Once a month apply 2 drops of an ISO 32 oil. Release and apply belt tension to distribute
oil.
