Lagler HUMMEL, Operation, Maintenance And Safety Manual

Page: 11 / 72

HUMMEL
®
01.12.2012
English / Englisch
TECHNICAL DATA
Intended applications
Sanding wooden and cork floors, plastic skating rings, with special
version also machining of sheet metal surfaces.
Basic equipment
Machine ready for operation, dust bag, MultiClip for dust bag fixture,
cable support, 10 m extension cable 3 x 2.5 mm² (or 5 x 1.5 mm² for
three-phase AC motor), O-ring as a strain relief device, operating
instructions with safety remarks, tool kit complete with closed mouth
wrench size 13/10 mm, open-mouth wrench size 17 mm, hexagonal
socket wrench size 4 mm, 5 mm and 6 mm, setting fixture, box wrench
and respiratory protection mask P3.
Optional equipment
Carrying handle, TransCart, pocket for ear plugs, safety switch for
fault current PRCD-S (for German mains supply), safety belt.
Wearing parts
Please check the condition of the wearing parts mentioned below
at regular intervals in order to be able to work safely and optimally
at all times.
Replace the following parts in case of wear and/or damage:
• Extension cable
• Motor cable
• Sealing felt
• MultiClip
• V-belts
• V-belt pulleys
• Belt tensioner
• Sanding drum
(after daily use, exchange every 1 - 2 years)
• Tensioning roller of the drive unit
(after daily use, exchange every 1 - 2 years)
• Guide rollers at the drive unit
• Guide roller at the machine housing
• Side cover
• Dust bag
• O-ring used as a strain relief
• Back wheel
• Lateral wheels
3
WARNING!
RISK OF DEATH from electrical shock:
The machine may never be used for wet
processing operations of any kind!
NOTE:
You will find the corresponding part numbers
for the optional equipment and wearing
parts in Section 11, Spare parts .
11