LAFERT no1 CEG002.1, Instructions For Use Manual

Page: 12 / 51

12
Instructions for use
EN
Electric Kettle
The manufacturer shall not be liable for any damage caused by improper using
of the appliance.
For security reasons, it is recommended for the electrical wiring to be equipped with a
30 mA residual-current circuit breaker.
Note: If the power cord or the mains plug is damaged, it should always be re -
placed or repaired at a specialized repair facility.
WARNINGS
1. Never use the appliance if it is damaged or works abnormally.
2. Do not use the appliance if it has been dropped from a height and shows visible signs of
damage.
3. Do not use extension cords or other electrical outlets that do not meet current electrical
standards and codes.
4. Any repair, removal or replacement of any parts should always be performed at a specialized
facility.
5. In the event of external components such as the electrical contacts, the plug or the cord get -
ting wet, make sure to dry the kettle and its elements before use.
6. Never handle or operate the appliance with wet hands.
7. If you think the appliance might be broken, NEVER try to repair it yourself.
8. Do not use the device in bath tub or shower, above sink, or near any other tank with water or
other liquid.
9. Never wash the device in running water or in any manner, which allows water to drip onto the
device.
10. Never put the device connected to mains outlet on wet surface.
11. Before connecting the device to mains outlet, check whether mains parameters are compliant
with the values indicated on rating plate of the device.
II. BASIC INFORMATION:
1. Water filter
2. Lid
3. Lid opening button ( CEG002.1 / CEG002.2 / CEG003 / CEG012.1 / CEG012.2 / CEG016)
4. Handle
5. ON button
6. Base
7. Power terminal
8. Illuminated water level indicator
9. Plug
10. Rolled-up power cord holder