LAFERT no1 CEG002.1, Instructions For Use Manual

Page: 13 / 51

13
Instructions for use
EN
Electric Kettle
III. OPERATION:
Before use:
1. Remove the protective film and all other elements of the package
2. Unwind and straighten the power cord
3. Fill the kettle with water up to the „Max” level
4. Plug the power cord into an appropriate outlet
5. Press the switch in the „I” position
6. The inside of the kettle will light up
7. Once the water boils – discard it and repeat this process three more times.
Note: The kettle may emit odor during first use. This is due to the fact that certain parts
may be lightly lubricated during the production cycle. This is normal and should cease
immediately after first use.
Boiling water – operation
1. Connect the base into an appropriate outlet.
2. Lift the lid of the kettle and pour water in.
3. When pouring water into the kettle, make sure that the water level remains within the range
between „Min” and „Max”.
4. Set the kettle on power base.
5. Turn the kettle switch to the „I” position.
6. The inside of the kettle will light up
7. Once the water boils, the kettle will automatically shut off.
8. Thanks to the base and a simple power terminal, the water may be poured from the kettle
without the need to turn it off.
9. Water may be poured from the kettle without lifting the lid.
NOTE: Always lift the kettle by the handle, as its housing tends to heat up.
Protection against overheating and against turning on without water.
Kettle is equipped with a modern controller, which protects it from overheating when used several
times in a row.
The kettle is also equipped with a safety feature that turns it automatically off when there is no
water inside. In this case, when turned on, the kettle automatically switches off after about 30
seconds and the backlight turns off inside of the kettle. You should then remove the kettle from the
base and put the switch in “0” position. After refilling with water, the kettle will be ready for use.