manualshive.com logo in svg

LaCie ICA-312, User Manual, Page: 25 / 245

Share
Download
LaCie ICA-312 User Manual Download Page 25

LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual

25

CONNECT TO YOUR NETWORK - DISKLESS LACIE 5BIG
NAS PRO

Users who purchased a LaCie 5big NAS Pro enclosure without hard disks should follow the instructions below.

Enclosure with hard disks: If you purchased an enclosure with hard disks, please see 

Connect to the

Network

 for instructions on how to connect to your network.

CHOOSE COMPATIBLE HARD DRIVES

Please consider the following before adding hard drives to your LaCie 5big NAS Pro:

When adding new hard drives to the enclosure, consider 

LaCie 5big Hard Drives

. LaCie hard drives are

■

specially prepared and optimized for use with LaCie NAS.
If you are installing non-LaCie hard disks, please note that LaCie NAS are compatible with and should work

■

seamlessly with any SATA II or SATA III hard drive. Before adding a hard drive to the enclosure, LaCie
receommends that you check the list of supported 

Hard Drives

.

INSTALLATION STEPS

Step 1: Update the Firmware for the LaCie USB Key and Note the LaCie 5big NAS Pro's MAC Address

Your LaCie 5big NAS Pro shipped with a LaCie USB flash drive (Key). The USB Key will help you boot the LaCie
5big NAS Pro and format your hard drives. It can also help you troubleshoot the device (see 

LaCie NAS Rescue -

5big NAS Pro

).

Summary of Contents for ICA-312






















































































































































































































































Reviews:

No comments