manualshive.com logo in svg

LaCie ICA-312, User Manual, Page: 171 / 245

Share
Download
LaCie ICA-312 User Manual Download Page 171

LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual

171

LaCie SimplyRAID configuration with three disks. All colors are represented since the RAID array uses

■

single disk security and the disks are of mixed capacities.

ABOUT RAID MODES

Refer to the table below for an overview of the different RAID modes, and see the descriptions for details. Note
that this information is summarized in the RAID Setup Wizard on the Dashboard.

RAID Mode

Minimum
Hard Drives

Data Capacity

Protection Performance

Factory
Default

SimplyRAID

2

Optimized

Yes

RAID 0

2

100%

–

RAID 1

2

50%

–

RAID 5

3

60% - 75% (estimate varies by
disk configuration)

–

RAID 6

4

60% (estimate varies by disk
configuration)

–

Note on RAID 0 and 4TB hard drives: RAID 0 configurations with five hard drives cannot surpass 16TB.
LaCie recommends against using five 4TB hard drives in a RAID 0 configuration.

Note on RAID 1: RAID 1 will not be available in four- and five-disk configurations.

Summary of Contents for ICA-312






















































































































































































































































Reviews:

No comments