LaCie ICA-312 User Manual Download Page 11 | Manualshive

Page: 11 / 245

LaCie ICA-312 User Manual Download Page 11

LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual

11

Step 2: Power on the LaCie NAS

Turn on the device on.

1.

LaCie 2big NAS: Push the power button on the back of the device to the ON position.

■

LaCie 5big NAS Pro: Lightly push the the front LED button.

■

The front LED will turn on and then begin blinking. The device is ready to be accessed once the blue LED has

2.

turned solid. Your LaCie NAS may take up to three minutes to boot.

LaCie 2big NAS

LaCie 5big NAS Pro

Caution: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from
another LaCie device or another manufacturer. Using any other power cable or power supply may cause
damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie
device. Failure to remove the adapter may result in damage and will void your warranty.

«
...
9
10
11
12
13
...
»

Summary of Contents for ICA-312






















































































































































































































































Reviews:

No comments