LaCie 12big Rack Network
Operation
User Manual
page 23
3.3. Ops Panel LEDs and Switches
The Ops Panel LEDs (
Fig. 15
) fault and status conditions are defined
in
Table 05
while the functions of the push-button switches are de-
fined in
Table 06
.
Please refer to
4. Troubleshooting & Problem Solving
for details of
any fault indication.
Table 05 - Ops Panel LEDs
LEDs
Status
Power Active
Constant Green: good or positive
indication.
Unit Fault
Constant Amber: fault present
Enclosure ID
Blue: only when activated
Table 06 - Ops Panel Switches
Push-button
Switches
Definition
On/Off
Function of this button is dependent on
the enclosure status
✦
Enclosure connected to power
source but not operating: Press but-
ton to activate and commence boot
process
✦
Enclosure operating: Depress button
for <4 seconds to shut down the
enclosure
System Reset
Resets the enclosure hardware and
firmware.
Note: This button is recessed and is
activated with a ball-point pen or similar
implement.
Enclosure ID LED
Each press of this button causes the state
of the blue ID LEDs on the Ops Panel
and rear panel to change.
Fig. 15 - Ops Panel LEDs
