Lacanche RULLY, General Manual

Page: 16 / 40

INSTALLER
’S MANUAL
RULLY
Page 16 of 40 – US –
BACK SPACER VENT FITTING:
It is mandatory to mount the back spacer vent R to the wall supplied with the appliance.
Screw the 2 brackets S to the wall according to figures 35, 36 and 37 (screws not supplied), then fit the back spacer
vent onto these brackets by using the washers and nuts supplied with the range.
STABILITY DEVICE INSTALLATION INSTRUCTIONS:
Screw the anti-tip bracket T to the wall according to figures 36 and 37 (screws not supplied).
Remove the right-hand drawer, push the range against the wall until the anti-tip bracket screw goes through the back
of the range. Through the drawer gap, screw the nut and its washer on the anti-tip bracket screw
R
S
Figure 35
Figure 36
Figure 37