USER’S MANUAL
INDUCTION HOB
The booster function (lasts 10 minutes), when you use the booster function, you need to check the
pan continually.
With all induction, the booster function is very power full. Overuse may damage cookware.
The child safety function blocks the induction unit leaving it off to avoid its being switched on
accidentally, for example by a child.
Activating the child safety function :
Ensure the induction zones are in the off / zero position. To engage/ disengage the child security
function, the 3 rings have been divides into two sets - the right hand two rings and the left hand
one ring.
For the two right hand induction rings
Turn the two right induction control knobs anti-clockwise and hold in this position for a couple of
seconds to activate of child security function (signalled by the letter «
L
». The child safety function
is now active for the two right induction rings. If the control knobs for the two right zones are now
turned, nothing will happen.
For the left hand induction ring
Repeat the process described above with the knob for the left induction zone.
Desactivate Child Safety
Repeating the process described above to a zone wich has been made safe, will re-activate the
zone and the letter «
L
» will go out.
CAUTION
: You can use the two right induction rings when the child security is activate on the left
induction ring. You can use the left induction ring when the child safety is activated on the right
rings.
Over heating Cut Out :
In the case of over heating, the induction unit zone will automatically cut out.
Recommendations
Heating is extremely fast.
We advise you to keep a careful eye on your dishes until you are familiar with to induction cooking.
Never leave oil or other greases to heat unattended.
We recommend for maximum efficiency of the induction hob to match the diameter of the cookware
to the diameter of the circle printed on the glass-ceramic surface, particularly when using small
ring. When using a cookware of larger diameter than the printed zone, offset the cookware towards
the rear of the printed circle.
We advise against the use of cookware without a fully flat bottom; some pans have engravings,
wich may decrease efficiency.
Disregarding these precautions may decrease the efficiency of your induction hob.
Your food will not cook efficiently unless your pan is ferromagnetic and in direct contact with the
selected induction zone Ferromagnetic means iron/ steel cookware check to see if a magnet sticks
to it.
Avoid scratching the cooking surface with metallic or abrasive objects.
If you remove a pan from the cooking zone for a moment the display flashes. It is advisable to turn
off the power.
If the pan is repositioned on the zone, power restarts automatically at the same level and the
flashing ceases.
Cluny induction - Ft 151a - GB - Rév 05 - Modifié le : 07/10/2013 23/31
