LAC Ht40B, User Manual, Page: 15 / 30

15
uSEr , setting of user menu
Display Meaning
StP1
Parameter that is placed on the 1st position of user menu:
•
no … no parameter
•
PCn1 … indicates power in % of the control output 1.
•
PCn2 … indicates power in % of the control output 2.
• AoFF
… function for switching alarm OFF.
• Aut
… starting / ending of autotunning of PID parameters.
• L-r
… selection of setting for stp value controlling.
• dIF … difference of remote stp value for system Master-Slave .
•
CdLo … limit of low range for remote stp value for cascade controlling .
•
CdhI … limit of high range for remote stp value for cascade controlling .
• Pb1A
… proportional band of the output 1, PID set 1.
• It1A
… integral value of the output 1, PID set 1.
• dE1A
… derivative value of the output 1, PID set 1.
• Pb1b
… proportional band of the output 1, PID set 2.
• It1b … integral value of the output 1, PID set 2.
•
dE1b … derivative value of the output 1, PID set 2.
•
hYS1 … hysteresis of the output 1 in ON/OFF controlling.
• Pb2A
… proportional band of the output 2
• It2A
… integral value of the output 2
• dE2A
… derivative value of the output 2
• hYS2
… hysteresis of the output 2 in ON/OFF controlling.
• o2Lo … low limit of signalling for the output 2.
•
o2hI … high limit of signalling of the output 2.
•
ALLo … low limit of alarm.
• ALhI
… high limit of alarm.
StP2 Parameter that is placed on the 2nd place of user menu. The list is the same as in
StP1
.
StP3
Parameter that is placed on the 3rd place of user menu. The list is the same as in
StP1
.
StP4 Parameter that is placed on the 4th place of user menu. The list is the same as in StP1 .
StP5 Parameter that is placed on the 5th place of user menu. The list is the same as in
StP1
.
StP6 Parameter that is placed on the 6th place of user menu. The list is the same as in
StP1
.
StP7 Parameter that is placed on the 7th place of user menu. The list is the same as in
StP1
.
StP8 Parameter that is placed on the 8th place of user menu. The list is the same as in StP1 .
PASS
, passwords for the entry to higher levels of menu
Display Meaning
P oP
Password for the entry to operation level . If it is set
oFF
, the entry is not secured with password.
•
Range:
oFF
, 1 to 9999.
PAS Co
Password for the entry to configuration level . If it is set
oFF
, the entry is not secured with password.
•
Range:
oFF
, 1 to 9999.
PAS SE
Password for the entry to service level
. If it is set
oFF
, the entry is not secured with password.
Range:
oFF
, 1 to 9999.