PixelPro
3.2
Instruction
Manual
R
5
1. Starting Interface
When installing and starting up the software for the first time, the biological or industrial
application option box will pop up. The software will automatically optimize parameter
settings based on user choice. While using the software, the application option can also
be switched through [Information] - [Options] - [Microscope] on the right upper part of
the menu bar.
[Biological]
: At software installation, automatic white balance defaults to a gamma value
of 2.10 and the exposure mode to the right.
[Industrial]
: At software installation, the default color temperature value is 6500K, area
white balance defaults to auto, sets the gamma value to 1.80 and exposure mode to
middle.
It normally takes around 10 seconds for the software to start up. Some cameras will take
longer to start up, such as the FL-20BW, which will generally take about 20 seconds to
start up.
If no camera is connected, or an unsupported camera is connected, an error dialog pops
up when the software is started. Clicking “
OK
” or closing the prompt automatically exits
the program.
