The operations described below are required for both L8100 and
[AUTO] switch. [AUTO] switch and [SEN.ON] LED are lighted on.
switch is lighted on. Ready to start the laminating work.
Depress [AUTO] switch. LED of [AUTO] switch is lighted on.
It is ready to start L8100 operation..
STICKER
4. Indication of papers exhausted:
When the papers have run out, [P.END] LED lights, operation
Buzzer sound indicating detection of the end of papers ―― ――
silence the buzzer.
When the papers have run out, the L8100 operation comes to stop
and [AUTO] switch LED goes on-and-off, and the buzzer gives
STICKER
LED of [AUTO] goes off and silence the buzzer.
Note: Ensure to depress [AUTO] switch.
For restart the operation, load the paper, and feed the paper by turning
[Paper Feed Roller Knob] and lift [Accumu-Roll] up the highest position,
and then return to the step (3).
- 14 -
START/STOP
〇
AUTO
SEN.ON
L8101SL.
SEN.ON
Then, depress [START/STOP] switch. LED of [START/STOP]
―
〇
AUTO
AUTO
L8100
warning. Depress [AUTO] switch.
L8101SL
MANUAL
〇
SPACE
POWER
P.END
SPACE
SEN.ON
AUTO
START/STOP
POWER
P.END
〇
SPACE
〇
START/STOP
comes to stop and the buzzer gives the warning.
Depress the [START/STOP] switch to turn off the LED and
〇
POWER
P.END
3. Start Laminating and Kiss-Punching Work.
START/STOP
―
〇
―
〇
Note: Ensure to depress [START/STOP] switch.
When prints are stacked for laminating the “P. END” LED turns
off, indicating the unit is again ready for operation
POWER
P.END
SPACE
SEN.ON
〇
L8100
L8101SL
MANUAL
AUTO
AUTO
After setting [Laminating Tape] and [Paper] correctly, depress
―
〇
