background image

  Instruction Manual        | 

         1

 1.0  Introduction

Congratulations on purchasing your Labnet ProBlot™ Rocker. This high-capacity bench rocker is a basic 
bench-rocking platform that has been designed for a long life and trouble-free service. The bench rocker 
speed is adjustable to provide the gentle motion required for staining fragile gels as well as the more 
vigorous action necessary for washing blots.

 2.0  Packing

The Labnet ProBlot Rocker includes the following components:

  S2025-B 

ProBlot Rocker with single platform 

S2025-D-B 

ProBlot Rocker with double platform 

S2025-XL-B 

ProBlot Rocker with large single platform 

S2025-XLD-B 

ProBlot Rocker with large double platform

  Instruction manual

 3.0  Specifications

Electrical requirements

Rocker 115V: 120V± 10% – 50/60Hz, 0.2A 
Rocker 230V: 230V± 10% – 50/60Hz, 0.1A

Fuse

2 x 1A (120V) 
2 x 0.5A (230V)

Speed settings

5 – 120 tilts/minute

Motion

Rocking

Tilt range

Fixed 7°

Timer

from 0 to 2 hrs. or continuous

Maximum load

11 lbs. (5 kg)

Dimensions

Rocker 25: 11.4 x 12.6 x 5.7 in. (29 x 32 x 14.5 cm) 
Rocker 25 XL: 12.8 x 14.2 5.7 in. (32.5 x 36 x 14.5 cm)

Platform dimensions

11.4 x 8 in. (28.9 x 20.3 cm)

Weight

11.7 lbs. (5.6 kg)

Operating conditions

from 4°C to 65°C, up to 85 RH, non-condensing

 4.0  Safety  Information

Do not use the rocker near water. Ensure that water doesn’t get on the device, particularly during 
cleaning.

  If the unit is used in a manner not specified by the manual, the degree of protection may be impaired.
  The plug should only be used in a wall outlet with protective earthing.
  The unit should be used with a power supply cord of at least 18 AWG.
  The equipment will not restart if mains power is interrupted.
  The equipment will restart in cases of mechanical interruption.
  Do not expose the rocker to aggressive vapors (e.g. organic solvents).
  Do not insert any objects into the rocker (such as a screwdriver or metal rods).
  Never operate the rocker without the platform securely attached.
  Hazardous samples should be shaken only in appropriate containment vessels.

Do not put your fingers between the rocking platform and the housing. Danger of mechanical injury.

Summary of Contents for ProBlot Rocker 25








Reviews: