Figure 25. Sensor identifications; sensors found
If necessary, enter identifiers for the sensors in the Descriptionfield and press the
Savebutton.
If the control unit does not identify all connected sensors.
Check the sensor connections.
Once you have conducted the check, press the Detect sensorsbutton again.
The control unit will look for the sensors for approx. 2 minutes, unless it
has already found three sensors. After the search, the device shows the
number of sensors found in the browser view and the System OK
message in the control unit display.
The sensor detection can be interrupted by pressing the Stop detection button.
Installation and Operating Instructions | idOil-D30
23/51
DOC001602-EN-4
