21
EN
PL-1000 Mobil
Connecting the power supply
The device may be operated only with the power supply cited on the type plate of the de-
vice. The mains voltage must match with the device voltage cited on the label of the power
supply.
E
If there is no suitable country-specific adapter included in the scope of delivery, contact
an authorised dealer (see also chapter "10 Questions and problems" on page 33).
To remove the existing country-specific adapter, if necessary:
E
Pull back and hold the catch for the adapter and at the same time lift the country-specif-
ic adapter out of the recess in the power supply.
Fig. 1: Remove country-specific adapter
To insert the desired country-specific adapter:
E
Place the country-specific adapter in the recess of the power supply as shown below.
E
Press the adapter into the plug-in power unit until the catch can be heard to engage.
Fig. 2: Insert country-specific adapter
5.2
