Using LabelTac
When using die-cut labels...
26
27
Using LabelTac
Warranty
When using die-cut labels...
Warranty
Load the die-cut material in the printer, leaving a small amount
of the first label leading out of the mouth of the printer.
When ready to print your label, first go to ‘Printing Preferences’
for your LabelTac
(see page 24)
. In the tabs at the top of the
window, click ‘Stock’.
Under ‘Type’ in the ‘Media Settings’ section, change from
‘Continuous’ to ‘Labels with Gaps’. Click OK.
Change the number of copies to print to ‘1’,
(if it isn’t set to that
already)
and click Print/OK to begin printing.
The printer will print this first label off-center, and the print will overlap
into part of the second label. This is normal.
(The printer self-calibrates itself
by reading the gaps between the labels, and once it reaches the end of the
second label, it will be fully calibrated and aligned.)
Go back and print the rest of the labels as normal.
We offer an industry-leading, 4-year, full
warranty to our LabelTac customers. This
is a 4-year warranty on parts, manufacturer
defects and even the thermal print head. Our warranty is the label
printer equivalent of a “bumper-to-bumper” warranty. If anything
goes wrong, we’ve got your back!
Warranty Limitations
CSS’s limited warranty provides that, subject to the following limitations, each Product will be free
from defects in material and workmanship and will conform to CSS’s specification for the particular
Product.
CSS will have no liability for any Product returned if CSS determines that:
•
The Product was stolen from CSS.
•
The asserted defect:
•
The Product was not sold to you as new.
•
The Product was not used in accordance with CSS specifications and instructions.
1
2
3
4
5
To switch back to using standard continuous vinyl, simply return to the ‘Printing
Preferences’ window and change the Media Type back to ‘Continuous’.
**
For full warranty terms and conditions, please visit www.labeltac.com/support.
o is not present,
o cannot reasonably be fixed because of damage occurring when
the Product is in the possession of someone other than CSS, or
o is attributable to misuse, improper installation, alteration
(including removing or obliterating labels and opening or
removing external covers (unless authorized to do so by CSS)),
accident or mishandling while in the possession of someone
other than CSS, or use of unauthorized supplies/accessories.
Summary of Contents for 4
Page 1: ...LabelTac 4 Setup Guide...
