Labelmaster Masterform 3.0, User Manual

Page: 55 / 81

109 108
Moving fields on the form: use
the Nudge tool
You may sometimes need to make minor
adjustments to individual fields on the shipping
paper to get it to print correctly. Always try to
adjust your margins first, but if that doesn’t solve
the problem, use the Nudge tool (see Figure 38).
To access the Nudge tool, you must be in the
Print Preview of your form. Go through the wizard
and complete the shipping paper normally. When
you arrive at the Print Preview, choose Settings
from the View menu.
Figure 38: The Nudge tool.
If margin adjustments are not working for all fields
when you have printed, use the Nudge tool to
move field-specific information. (See Moving fields
on the form: use the Nudge tool .)
If your information prints too high…
…increase the top margin by the amount it is
away from the correct printing position.
If your information prints too low…
…and the top margin is set to its minimum value,
then your printer’s Top of Form (TOF) may not be
correctly set. Refer to your printer manual for help
setting your top of form. If your top margin is not
at its minimum setting, subtract the distance the
information needs to move to print correctly.
If your information prints too far to the left…
…increase the left margin by the distance the
information needs to move to print in the correct
position.
If your information prints too far to the right…
…and your left margin is set to its minimum value
then you need to reposition the printer’s tractor
feed further to the right. Refer to your printer
manual for help changing tractor positions.
If the left margin is not at its minimum value,
reduce the left margin to subtract the distance
that the information needs to move.