i
•
FeedGood
M
W-Link Remote Terminal • Technical Guide
|
9
Power On
How to switch on the Remote Terminal
1.
Press
ON/OFF
.
The display shows the Home Screen, then it displays the
same screen that is shown on the
scale to which the Remote
Terminal is connected. The Remote Terminal is ready to
perform the desired operations.
Note
the Remote Terminal is set by default to switch on
every time it is powered on. If it is not desired that the
Remote Terminal turns on automatically when it is powered
on, it is necessary to set the "Power on Method" Preference
to "Manual".
Note
: if when switched on, the display shows the "NODATA.
2.4GHz W-Link network not connected" message check that
the scale is powered on and within the work range. If the error
persists, check that the Remote Terminal has the "Private
Radio Network ID Code" Preference programmed with the
same ID code of the "W-Link ID" System Preference of the
scale.
How to shut down the Remote Terminal
1.
Press
ON/OFF
.
3
