i
•
FeedGood
M
W-Link Remote Terminal • Technical Guide
|
7
Maintenance
In order to prevent malfunctioning or failures, it is recommended
to perform the following operations periodically:
•
Check that the external power supply system to the
Remote Terminal works properly, also checking that the
connection points have no oxidization or humidity.
•
Periodically clean the Remote Terminal using a moist, soft
and down-free cloth. Never use sprays, abrasives,
solvents or sharp objects which can damage the case.
•
Before cleaning the mixing wagon with high pressure
water jets, disconnect the power cable, remove the
Remote Terminal from the mixing wagon and protect the
connectors of the power cable from possible water
infiltrations.
EC Declaration of Conformity
The Remote Terminal complies with the essential requirements of
the Directive 1999/5/CE R&TTE on Radio Equipment and
Telecommunications Terminal Equipment and Directive
2014/30/EU on Electromagnetic Compatibility as it complies with
standards EN 61326-1:2013, EN14982:2009 (agricultural
machinery), ISO13766:2006 (earth-moving machinery),
EN50498:2010 (road vehicles), ISO7637-3:2007.
If the Remote Terminal is not installed and used in strict
compliance with the instructions provided in this Guide, it could be
faulty or cause the surrounding equipment to malfunction. In any
case there is no guarantee of these failures not occurring in a
specific installation. Should any malfunctioning occur, contact the
Customer Service which can suggest measures to be taken to
eliminate the problems.
Compliance with Directives is only guaranteed when original
accessories and spare parts are used. Any modifications or
interventions to the Remote Terminal not authorised by the
manufacturer in writing could cancel its conformity to Directives
and make it prohibited for use.
