Labconco XPert Series, User Manual

Page: 15 / 60

Chapter 3: Getting Started
Product Service 1-800-522-7658 11
Unpacking the Enclosure
Carefully remove the shrink-wrap or carton on the enclosure and inspect it
for damage that may have occurred in transit. If damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
•
Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.
•
If enclosure was damaged in transit, you must file a claim directly
with the freight carrier. Labconco Corporation and its dealers are not
responsible for shipping damages.
•
The United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of
delivery.
•
Do not discard the packing material until you have checked all of the
components and tested the unit.
•
We recommend that you do not remove the enclosure from its
shipping container until it is ready to be placed into its final location.
Move the unit by placing a flat, low dolly under the shipping skid, or
by using a floor jack.
NOTE: DO NOT MOVE THE ENCLOSURE BY TILTING IT ONTO A
HAND TRUCK.
Install the Enclosure on a Supporting Structure
and Work Surface
Note: Use caution when lifting or moving the enclosure.
When installing the enclosure onto a work surface or benchtop, ensure that
the structure can safely support the combined weight of the enclosure and any
related equipment. The work surface should be at least as wide as the
enclosure to properly support it. The front of the enclosure should be aligned
within 1/8" of the front of the work surface. Mounting holes are provided in
the Labconco accessory work surfaces to secure the enclosure.