Chapter 1: Introduction
Product Service 1-800-522-7658
2
Original instructions
Chapter 3: Getting Started
contains the information you need to properly unpack,
inspect, install, and certify your laboratory fume hood.
Chapter 4: Performance Features and Safety Precautions
explains how the
laboratory fume hood operates and the appropriate precautions you should take
when using the fume hood.
Chapter 5: Using Your Fiberglass 30
discusses the basic operation of your fume
hood. Information on how to prepare, use and shut down your fume hood is
included.
Chapter 6: Maintaining Your Fiberglass 30
explains how to perform routine
maintenance on your fume hood.
Chapter 7: Modifying Your Fiberglass 30
explains how to modify the fume hood
or add accessories.
Chapter 8: Troubleshooting
contains a table of problems you may encounter
while using your laboratory fume hood including the probable causes and
suggested corrective actions.
Appendix A: Fiberglass 30 Hood Components
contains labeled diagrams of all of
the components of the fume hoods.
Appendix B: Fiberglass 30 Hood Dimensions
contains comprehensive diagrams
showing all of the dimensions for the laboratory fume hoods.
Appendix C: Fiberglass 30 Hood Specifications
contains the electrical
requirements for laboratory fume hood. Wiring diagrams are also included.
Appendix D: References
lists the various resources available that deal with
laboratory fume hoods.
Typographical Conventions
Recognizing the following typographical conventions will help you understand
and use this manual:
Book, chapter, and section titles are shown in italic type (e.g.,
Chapter 3:
Getting Started
).
Steps required to perform a task are presented in a numbered format.
Comments located in the margins provide suggestions, reminders, and
references.
Critical information is presented in boldface type in paragraphs that are
preceded by the exclamation icon. Failure to comply with the information
following an exclamation icon may result in injury to the user or permanent
damage to fume hood.
!
