Labconco Axiom C1, User Manual, Page: 21 / 86

21
4: Installation
With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:

Unpack and move the product

Install the product

Connect electrical service

Connect service utilities

Connect to an exhaust system (optional)

Arrange certification for the product
Unpacking
The following tools are required to unpack the equipment:

Box knife

#2 Phillips screwdriver

Two ½” wrenches

Pliers

Carpenter’s level
The following safety precautions must be followed by all personnel unpacking the
equipment.

Wear safety glasses

Wear gloves

No loose fitting clothes

Wear close-toed shoes

Follow safe-lifting practices (do NOT attempt to lift this product without
specialized lifting equipment certified to lift up to 1000 lbs.)
A quick reference Installation Guide is located on the front sash glass (see Figure 4-2)