10
Keep the tubes balanced
•
Although this centrifuge can accept sample balancing by eye, we recommend that you use this centrifuge in a
well-balanced condition to prolong its life expectancy
•
Never intentionally run the centrifuge under unbalanced condition even though the allowable imbalance is not
exceeded
Inspect the rotor
Symmetrically load centrifuge tubes in rotor
8. OPERATION
Normal Operation
Turn on the POWER switch and the centrifuge will display the running interface last time after passing the self-checking
process. (See figure 8-1)
1.
Speed area Lock status Time area
150 x 100rpm 12 min
Figure 8-1 the last running interface
o
Speed: 15000rpm. Running time: 12 minutes.
o
The door lock is released.
CAUTION
:
•
Any abnormalities such as corrosion or scratches are found, stop using the rotor and contact our service centre.
•
Only manufacturer’s rotors should be used with this unit.
CAUTION
:
•
Make sure the rotor door is securely
fixed
on the rotor &
rotor and spindle are tightened
. Otherwise, the
rotor may be moved off while rotating and
cause
damage of the centrifuge or rotor.
CAUTION
:
•
Do not push or lean against the centrifuge while it is running.
•
Do not run the centrifuge with fragments of tubes or dew drops left in the rotor chamber.
•
If this centrifuge makes strange noise during its operation, stop it immediately and contact our service centre.
Notify the alarm code if displayed.
Summary of Contents for 400.003.050
Page 20: ...19...