Compliance Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions : (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures :
— Reorient or relocate the receiving antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
A minimum separation distance of 20 cm must
be maintained between the antenna and the
person for this appliance to satisfy the RF
exposure requirements.
CAUTION: Changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
OFFICE
TEL
FAX
A/S Inquiry
2F, 120, Gwanak-ro, Gwanak-gu, Seoul
+82 2 888 7060
+82 2 888 7061
+82 2 888 7060
conspins.com
