Document type:
Last modified:
Page:
Based on template: ‘
Technical Documentation.dot
’
Technical Documentation 09-01-16
Page 21 of 21
File: ‘
NLB-60E communication protocol - Revision 2 DRFT 2A.doc
6.4 Replacing a device in the system
6.4.1 Replacing with a device that is already present on the NomadLink network
2
1
3
4
1.
Selected the missing device that shall be replaced.
2.
Select the device that shall be a replacement for the missing device.
3.
Press the Replace button to replace the serial number of the missing device with that
of the selected unassigned device. The selected unassigned device will now disappear
from the list of unassigned devices.
4.
Press the Store button to store the virtual device name table once all desired changes
are made.
6.4.2 Replacing with a device that is not present on the NomadLink network
If the replacement device is not yet connected to the NomadLink network you can simply edit
the serial number of the missing device to match that of the replacement device.
