Document type:
Last modified:
Page:
Based on template: ‘
Technical Documentation.dot
’
Technical Documentation 09-01-16
Page 16 of 21
File: ‘
NLB-60E communication protocol - Revision 2 DRFT 2A.doc
5.4 Virtual Device Name Management
5.4.1 Subnet VDN
Sets / gets a VDN entry i.e. virtual device name and associated serial number.
This command is only supplied as an alternative way for administration of the VDN table.
The administration of the VDN table should normally be done using the VDN Manager
application (see Chapter 6).
Address
Op.
Values (values from top to bottom)
[VDN]
- Virtual device name
[SN]
– Serial number to be associated with VDN
=
Reply (values from top to bottom)
[VDN]
- Virtual device name, a ‘*’ means it is unassigned
Subnet.VDN
X
Where X is a number
ranging from 1 to
60, addressing the
60 possible VDNs.
?
[SN]
– Serial number associated with VDN, , a ‘*’ means it is
unassigned
Examples
Subnet.VDN1 = B1-zone2-1 123456789
To ”clear” a VDN position simply assign it to nothing
Subnet.VDN1 =
The reply would the be the same as getting an empty VDN i.e.:
* *
