19
4.4 Adjustment of Control Functions
You are allowed to adjust various control functions by pressing the
MENU Button
a certain
number of times.
4.4.1 Temperature Setting
The procedures to set the desired temperature value are as follows:
1)
Turn the power switch on and check whether the VFD changes automatically from
Start-up Mode Display
to
Stand-by Mode Display
as shown below:
↓
2)
Press the
MENU Button
once and check whether the
Set Temperatue Display
(shown below inside a red circle) blinks:
3)
Turn the
Jog Dial
to select the desired temperature value and then press the
Jog
Dial
to store the desired temperature value.
⚫
Adjustment of control functions is automatically cancelled if no action is taken for
more than 30 seconds.