１２
⚫
Never install or use this equipment in explosive atmospheres.
⚫
Never install or use this equipment near to hazardous or flammable substances.
⚫
Never expose this equipment to direct sunlight.
⚫
Never install this equipment near any device that generates high frequency noises.
⚫
Considering the heavy weight of this equipment, use a proper device when lifting it.
3.4 Moving and Leveling
This equipment is equipped with four high-quality level casters shown below which combines
three mounting requirements into one: leveling adjustment, caster mobility, and vibration
control.
To move the equipment, turn the height adjustment handles to raise the anti-vibration rubber
feet. If the adjustment handle is too tight to turn due to heavy load, use a wrench to turn the
nut under the handle instead.
After moving the equipment to the installation site, use the adjustment handles to level the
unit and also to lock the rubber feet in place. The leveling procedures are as follows:
1)
Place the equipment to the desired location.
height
adjustment
handle
anti-vibration
rubber foot
