Installation_Sliding gate_Rack and pinion_N°7401
This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
09/15
p.3
6
-
Move the gate forward to the 4th marker and then repeat steps 4 and 5 to set the rack
and pinion.
7
-
Continue to advance the gate then drill/fix all 4 holes by repeating steps 4 and 5 to the
end of the rack and pinion.
After you've finished fixing the rack and pinion.
8
-
Place the gate in the closed position and then open it again by 2 cm.
Place the stop on the rack and pinion behind and press the limit switch sensor.
2 cm
Installing the limit
-
switch stop
OK
No
Be
hind
In
front
o
f
