Installation_Sliding gate_Rack and pinion_N°7401
This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
09/15
p.2
1
-
Place the gate in full opening position.
2
-
Disengage the operator.
(Refer to the operator manual)
3
-
Place the rack and pinion below
the limit
-
switch sensor on the toothed
wheel.
Place the rack and pinion flush with
the column.
4
-
Drill in the 1
st
mark on the rack and
pinion using a Ø5 mm drill bit.
Rack and pinion installation
