EN
9. Basic issues analyses
Problem
Problem analyses
Resolve method
Compressor not working Power not connected
Check the power
Power lead or wire damaged
Contact distributor or service agent
Fuse broken
Change fuse
Internal circuit fault
Contact distributor or service agent
Power supply off
Check if power cut
In heating process
Normal phenomena. When the temperature inside
the cabinet is lower than the settings, the cabinet
will heat automatically
Compressor noisy or
frequently on & off
Power supply not stable
Switch off the power, restart 3 minutes later
Cabinet not on flat floor
Adjust front feet to get the device straight
Not cold enough
Temperature set too high
Check temperature, reset it
Door open too long or too often Only open when necessary
Door gasket damaged
Contact your distributor or service agent
LED do
n’t
light on
Electric circuit problem
Contact your distributor or service agent
LED damaged
Contact your distributor or service agent
Door cannot close
properly
Cabinet not straight
Adjust front feet to get the device straight
Incorrect door mounting after
changing the door side
Mount the door correctly
Shelf out of the case
Put the shelf back to the right position
If you still face issues after checking the above, please contact your service center or dealer.
Replacing Light
This appliance consists of light-emitting diodes (LEDs). This type of diode cannot be changed by the
consumer. The lifetime of these LEDs is normally sufficient for no change to be made. If however, and
despite all the care taken during the manufacture of your wine cellar, the LEDs were defective, please
contact your after-sales service for any intervention.
