EN
4
．
Loading and Storage of Wine Bottle:
Bottle Loading Method:
Wooden shelf capacity (depends on your model): 5, 9 or 11 bottles / shelf
Please maintain a minimum 20mm between bottle and back plate
To ensure bottle and shelf safety, please check the following tips:
A. Spread your bottles out as evenly as possible over the shelves, so weight is not concentrated in one
point; and make sure your bottles will not touch the back of the cabinet.
B. Make sure bottles are not all grouped together at the top or bottom of the cabinet.
C. Follow the loading instructions provided in section 6.1, according to the type of storage fixtures with
which your cabinet is equipped, and never stack bottles on a sliding shelf.
Humidity percentage inside cabinet: 50%-80%
5
．
Installing the Handle
Install the handle according to the following four steps:
1.
Pull the door gasket out of the door in the handle screw holes area
2.
Take the screws from the Manual Bag & Put them in the dedicated holes
3.
Screw the door handle with a screwdriver
4.
Refit the door gasket to its relevant position
