IT
6
.
Ripiani
Esistono 2 modelli di ripiani scorrevoli :
(
A
)
(B)
Se si dispone di un modello di ripiano (A), e che si vuole cambiare un ripiano,
assicurarsi che a
bbia i
fori in cui
i ganci della guida
verranno inseriti
. Si deve
solo
porla
sulla guida
per installarla.
Se
si dispone di un
modello rack
(
B),
svitare la
guida
del ripiano
,
le viti
si trovano sotto
il ripiano
.
Per sostituire
un ripiano
basta avvitare
la guida
al ripiano
.
7. Manutenzione
Per assicurare
le migliori prestazioni e
il corretto funzionamento
del dispositivo
,
si consiglia una manutenzione
periodica
:
-
Assicurarsi che il cavo
di alimentazione sia scollegato
prima di pulire
la vostra
cantinetta o
prima di spostarla
.
-
Pulire l'interno
, almeno
una volta l'anno
,
dopo averla
scollegata
e scaricata
.
Usare
dell’
acqua e un
panno
neutro, poi
asciugare accuratamente con
un panno asciutto
.
- Si prega di
far
controllare il vostro dispositivo
d
al
l’assistenza del
proprio rivenditore
se si nota
un
malfunzionamento
.
8. Posizione inverno : come funziona ?
1.
Quando la temperatura programmata all’interno della cantina è inferiore alla temperatura es
terna,
il circuito di raffredamento si mette in moto per abbassare la temperatura. La spia di messa in moto
del circuito freddo sarà accesa (verde).
2.
Quando la temperatura programmata all’interno della cantina è superiore alla temperatura esterna,
comunque
sopra i 5 gradi (in un garage o una cantina l’inverno per esempio), il circuito di
riscaldamento si mette in moto per assicurare il mantenimento della temperatura richiesta. La spia
del circuito di riscaldamento sarà acceso (rosso).