La Pavoni LPSMCS01, Instruction Manual, Page: 23 / 184

21
EN
machine and make sure that it is not
damaged.
• Place the machine on a level surface,
remove the cover, take out the water
tank ( 4) and rinse it.
• Fill the tank with clean water, put it
back in its seat, and insert the silicone
tubes. Close the machine cover.
• Before connecting the machine, make
sure that the mains power voltage is
the same as the one indicated on the
data plate located under the base of
the machine.
• Insert the plug into the power socket.
• Turn on the machine by placing the
on / off switch ( 1) to position “I”. The
lamp ( 13) lights up to indicate that the
machine is powered.
• Insert the filter holder into the group
head.
• Position a container under the water/
steam nozzle ( 9).
• Turn the steam/hot water knob
anticlockwise ( 7). Move the hot water
dispensing switch lever ( 3) to position
“I”. When water comes out of the
turbo steam nozzle ( 9), move the hot
water electropump switch lever ( 3)
to position “0” and close the knob ( 7).
These operations are carried out to
ensure the correct filling of the boiler.
• Use the group head lever ( 17) to
dispense enough water to fill the
coffee circuit correctly.
• After completing these operations,
wait for the machine to reach the
operating temperature and the
indicator light ( 15) to come on.
N.B.: The operating temperature
light ( 15) will continue to switch
on and off automatically during
heating.
• Once the operating temperature has
been reached, dispense water from
the group head for about 10 seconds,
keeping the filter holder inserted.
• This operation optimises the group
head temperatures.
5. USING THE MACHINE
5–1. PRETREATMENT
• Once you have carried out the
operations described in the previous
chapter, the machine is ready for the
Pretreatment.
• Rinse the tank thoroughly with cold
water.
• Fill the tank with cold water and place
the tank in the machine.
• Place a bowl with a capacity of 1.5l
under the E61 group head.
• Dispense water for 1 minute with the
filter holder fitted.
• Fill the tank with cold water if
necessary.
• Place the bowl with a capacity of 1.5l
under the steam nozzle.
• Use the switch to turn on the electric
pump.
• Turn the steam nozzle knob.
• Dispense for 1 minute.
• Carry out the operations described 3
times.
5–2. PREPARING AND DISPENSING
COFFEE
• Once you have carried out the
operations described in the previous
paragraph, the machine is ready for
use.
• Do not cover the cup-warming shelf
with fabrics, felt etc.
• Select the desired filter and filter
holder depending on whether you
want to prepare a single coffee or a
double coffee.
• Fill the filter with the required amount