background image

La Marzocco USA 

 |  1553 NW Ballard Way — Seattle, WA 98107

T. 206.706.9104  |  F. 206.706.9106  |  [email protected]  |  www.lamarzoccousa.com

4. 

If desired, install drip tray by sliding under front 
of grinder until it pops into place.

5. 

Adjust the fork assembly to properly fit your 
portafilter. (

View Video Tutorial

)

a. 

Place your portafilter into the forks by 
positioning the portafilter at a slight 
incline until the portafilter touches the 
stop/activation pin then straighten the 
portafilter out.

b. 

Adjust the side tongues of the fork assembly 
until the portafilter is level with the ground.

6. 

Plug in grinder to acceptable grounded wall outlet

7. 

Turn the grinder on by moving the power switch 

from O to I. The grinder will light up.

8. 

Press the manual grind button, 

,  and confirm 

the grinder motor turns on.

9. 

Add coffee to the hopper ensuring the hopper 
gate is pulled to the open position allowing coffee 
to flow into the grinder.

10. 

With the portafilter on the forks, press and hold 
the manual grind button, 

,  until coffee exits 

the chute.

a. 

Coffee should fall into the center of the 
portafilter basket. If it does not, or you 
had other adjustment issues, reference 
full instructional manual for additional 
adjustment options.

Adjusting the Grind

1. 

Loosen the disk stopping pin.

2. 

Begin grinding coffee.

a. 

When changing the grind, ensure the grinder 
is running while moving the adjustment 
disk. This prevents jamming the burrs.

3. 

Rotate adjustment disk either couterclockwise, to 
fine the grind, or clockwise, to coarsen the grind.

a. 

In some cases it may be necessary to 

completely remove the disk stopping pin to 
adjust the grind either coarser or finer. This 
is due to the disk stopping nut halting the 
travel of the adjustment disk. If this is the 
case, do the following.

i. 

Loosen and remove disk stopping pin.

ii. 

Adjust grind as needed.

iii. 

Realign the disk stopping nut with 

TONGUE

ACTIVATION PIN OR STOP PIN

LEFT SIDE TONGUE

SIDE SET SCREW

TONGUE

DISK STOPPING PIN

COFFEE GRINDING ADJUSTMENT DISK

DISK STOPPING NUT

ADJUSTMENT DISK NOTCH

ADJUSTMENT INDEX

Reviews: