La Marzocco USA
| 1553 NW Ballard Way — Seattle, WA 98107
T. 206.706.9104 | F. 206.706.9106 | [email protected] | www.lamarzoccousa.com
Adjusting the Dose Time
1.
Press and hold the
menu button,
.
2.
Press the dose button
you would like to
change the time of.
Either,
1
,
2
or
3
.
Then release both buttons. The display will
change to showing the symbol of the dose you
are changing and the time the dose is currently
set to.
3.
Adjust the dose time using the navigation
buttons.
to increase the dose time and
to
decrease the dose time.
4.
Press and release the menu button,
, to save
the dose time and exit the menu.
Grind Flow Control Wires
Your Major V, Robur S, and/or Kony S allows different
wire inserts to be used in the outlet insert to control
the flow of grounds out of the grinder. The
Hybrid
grind
flow control (GFC) wire, installed by default, is the
best choice in almost all cases. If excessive clumping
is occurring, you may want to try the
Anti-Clumping
GFC wire,
Anti-Dust
GFC wire and instructions on how
to install them are found in a small plastic box that
came with your grinder. The Kony S and Robur S use
the same GFC wires. (
View Video Tutorial on Changing
Kony S/Robur S GFC Wire
) The Major V uses different
GFC wires. (
View Video Tutorial on Changing Major V
GFC Wire
).
Cleaning the Grind Chamber
Note:
you are able to clean the inside of your Major V, Robur S, and/or Kony S grind chamber without
disrupting your grind adjustment setting.
Tools Needed
• 5 mm Allen key, to remove ring support screws
• Dry nylon bristled brush, to clean burrs
• Clean, dry, lint-free soft cloth, to wipe surfaces
clean on ring support and grinder body
• Shop vacuum, to remove coffee from grind chamber
• Platic spudger (optional), to remove screw caps
1 Dose time
RING SUPPORT ASSEMBLY
ROUND OUTLET INSERT
COFFEE OUTLET GUARD
OUTLET INSERT
RING SUPPORT ASSEMBLY
OUTLET INSERT LOCK PIN
SQUARE OUTLET INSERT
COFFEE OUTLET GUARD
OUTLET INSERT
