6
EN
or breaks down, disconnect
it from electrical network (as
described in the preceding
point) and close water supply
valve. Do not attempt to
repair it. Contact a qualified
and authorized professional
to perform any repair. Repairs
must be performed exclusively
by the manufacturer or by
an authorized centre using
only original parts. Non-
compliance with the above
could compromise appliance
safe operation.
16)
During installation, you
should plan to make use of
an omnipolar connector, as
required by local, national,
and international electrical
codes and regulations.
17)
In order to avoid dangerous
overheating problems, it is
recommended that the power
supply cable be fully unfurled.
18)
Do not obstruct air intake
and exhaust grilles and, in
particular, do not cover the
cup warmer tray with cloths or
other items.
19)
Appliance power supply
cable must not be replaced by
users. In case power supply
cable becomes damaged,
shut off the appliance and
disconnect it from the
electrical network by switching
off the relevant circuit breaker
and close off the water supply;
in order to replace the power
supply cord, contact qualified
professionals exclusively.
20)
These instructions are also
available in an alternative
format on a website:
http://techcenter.lamarzocco.
com
.
21)
The appliance should be
placed on a flat counter and
in settings with the following
temperatures:
- Minimum room temperature:
5°C/41°F;
- Maximum room temperature:
32°C/89°F.
22)
Check your package to
make sure that the following
accessories are included:
• a number of 1-dose
and 2-dose portafilters
according to the number of
groups;
• replacement 1-dose and
2-dose filter baskets
• 1 tamper
• 1 blind filter
• cleaning detergent, for the
groups
• 3 stainless steel braided
COPIATE DA GB5R