37
EN
Display
Operating Procedure
Description
Cln
1
When the espresso machine is on, press the continuous button T3 and the button T1 at the same time in order
to activate washing procedure.
This enables the washing procedure of each group.
2
When activated, water pump comes into operation and the electric valve of the specific group being washed
will turn on and off the cycle.
There are about 10 preset cycles with an interval of 4 seconds. To manually stop rinsing procedure, press any
key.
NOTE:
In order to properly rinse the groups, put a small amount of detergent in a blank portafilter basket and
insert it in the group to be rinsed before activating rinsing process.
Rinse the group using a normal filter in the portafilter, by running hot water through it several times.
• This parameter allows the operator
to carry out the washing of the coffee
groups, in an automatic way, by running
multiple cleaning cycles.
• This espresso machine has a group
rinsing function (rinsing jets) integrated
in the electronics.
• Rinsing procedure purpose is giving the
operator more flexibility and freedom
with regard to these operations.
•
Do not perform the cleaning procedure
when other groups are dispensing
coffee.
Cleaning Cycles
Cleaning Cycles
MOST DETERGENTS CAUSE FOAMING DURING CLEANING PROCESS.
THIS FOAM GATHERS AT THE DRAIN BOX AND CAN BLOCK WASTE WATER FROM DRAINING PROPERLY.
RINSING MULTIPLE GROUPS SIMULTANEOUSLY COULD CAUSE THE DRAIN BOX TO OVERFLOW.
WARNING
Cln
