16
EN
b) Water pump motor power cord
This is the power supply for water pump
motor. The internal electronics will switch
the pump motor on when needed.
• 3-core cable with 1.5 mm
2
cross section
or 3-core AWG 16 (for UL version) secured
to espresso machine via a strain relief
connector.
c) Quick connection between water pump and
espresso coffee machine.
The electrical connection must be made
by using the connectors, as shown in the
following figures:
- View of the connectors;
- Cable connection;
- Cable tightening;
7) Waste water drain connection
Espresso machine drain is to be connected
by means of included reinforced plastic
tubing. Connect one end of the reinforced
plastic tubing to drain hose connection
on the left side of the espresso machine,
secure with included hose clamp. Connect
the other end to a suitable waste water
collection system.
In case such a system is not available,
drained liquids may be collected in a
suitable bucket, and any necessary drain
pipe extensions shall be made using
steel-lined PVC tubing and suitable hose
clamps.
Appliance connector Pump connector
