25
EN
7. De-commissioning and Demolition
1) De-commissioning and demolition
First of all, set the main switch to “0” or
OFF position.
Disconnecting from power outlet:
Disconnect the appliance from the
electrical network by switching off the
corresponding circuit breaker or circuit
protection device.
Remove power supply cord from power
connection.
Remove the pump motor power cord from
water pump motor.
Disconnecting from water system:
Shut off the water supply by closing the
specific tap located upstream from water
filter/softener inlet.
Disconnect the water pipe at water filter/
softener inlet.
Remove the hose connecting the espresso
machine to water pump.
Remove the reinforced plastic tubing on
drain connection.
At this point, the appliance may be
removed from the bar, being very careful
not to drop it or squash your fingers.
The appliance is made out of various
materials and therefore, if you do not
intend to put it back in service, it must
be taken to a special disposal company
that will select the materials which can be
recycled and discard the others.
Current regulations make it illegal to
discard such appliance by leaving it on
public grounds or on any private property.
Recycling notice: Warning for the protection of the
environment.
Used Electrical and electronic waste
contains hazardous but also valuable
and scarce materials which should be
recovered and recycled properly. We kindly
ask that you contribute to the protection of
the environment and natural resources by
delivering used equipment to the relevant
recycling locations if such locations are
available in your country.
