4
2.2.1 Input Wiring
WARNING:
Connecting the battery to the Inverter may cause a spark at the point of connection. There
is a RISK OF EXPLOSION in hazardous areas or locations where explosive gases have accumulated.
Access the rear of the inverter and locate the DC Input connection terminal. Connect DC wiring to the inverter
per figure-3. Refer to Table 2 for the recommended wire size.
WARNING:
Connect rated AC input to the Inverter, failure to properly rated input may cause a spark at
the point of connection.
Access the rear of the inverter and locate the AC Input connection terminal. Connect AC wiring to the inverter per
figure - 4. Refer to Table 2 for the recommended wire size.
With DC input wiring connected and operating within the DC range, verify inverter starts up by switching the
power switch to the front panel. The Inverter INV. ON LED should turn solid green, indicating successful start-up
and no faults. Using a digital multimeter, measure the AC output to verify voltage output.
2.2.2 Output Wiring
The LTI2PRO comes with Bulk AC connections at the rear of the inverter. Connect AC cables to the equipment
per the figure - 4. Select the recommended AC wire size using Table 2. If the distance between the invert
er’s
output and the load exceeds 10 feet, use the Power Wiring Guide in Appendix B to minimize the voltage drop
across the wire distance.
Figure 4 - Input and Output Connections
