background image

 

ii 

 

Unit Location 

 

 

Allow at least 6 inches of free air on all vented surfaces for proper cooling. 

 

Do not operate this unit in a closed-in area or restrict ventilation in any way. 

 

Do not set any battery on top of this unit. 

 

Never allow battery electrolyte to drip on this unit when reading the specific gravity or filling the battery. 

 

Never place this unit directly above a standard flooded battery. Gases from the battery will corrode and damage 

equipment.   

 

A sealed maintenance-free or valve-regulated lead-acid (VRLA) battery may be placed below this equipment. 

 

Check for Damages

 

 

Before unpacking the product, note any damage to the shipping container and take pictures. Unpack the product 
and inspect the exterior and interior of the product for damage. If any damage is observed, take pictures and 

contact the carrier immediately to file a damage claim. Contact La Marche for a Return Material Authorization 

number to have the inverter sent back for evaluation and repair.  

 

CAUTION:

 Failure to properly file a claim for shipping damages or provide a copy of the claim to La 

Marche, may void warranty service for any physical damages reported for repair. 

 

Returns for Service

 

 

Save the original shipping container. If the product needs to be returned for service, it should be packaged in its 

original shipping container. If the original container is damaged/unavailable, make sure the product is packed 

with at least three inches of shock-absorbing material to prevent shipping damage.

 La Marche is not responsible 

for damage caused by improper packaging of returned products. 

 

Inspection Checklist 

  

 

The enclosure exterior and interior are not marred or dented. 

 

 

 

 

 

 

 

No visible damage to the components.    

 

 

All hardware and connections are tight.  

 

All wire terminations are secure. 

 

All items on the packing list have been included. 

 

Handling

 

 

Equipment  can  be  very  heavy  with  uneven  distribution  of  weight.  Use  adequate  manpower or  equipment  for 

handling.  Until  the  equipment  is  securely  mounted,  care  must  be  used  to  prevent  equipment  from  being 
accidentally tipped over or dropped. 

 

 

Summary of Contents for LTI2 PRO





















Reviews: